Working With A Buff Er Battery; Troubleshooting Guide; Attention - BFT LOG-BC Instrucciones De Uso

11. WORKING WITH A BUFFER BATTERY
BBV TWIN allows the automation system to operate even when the mains power supply is disconnected for a short time.
Consult the BBV TWIN installation manual.

12. TROUBLESHOOTING GUIDE

1) The chain drops by a few centimetres at the end of the close cycle.
At the end of the fi rst close cycle, the control unit determines the force necessary to be applied with the electronic brake and the excessive
dip will be compensated when subsequent close cycles are performed.
2) The barrier is reopened by the automation system during a close cycle, even though there are no obstacles and the photocell beams are
not interrupted.
The chain height setting is too high. Reduce the setting with trimmer PM2.
3) ENCODER CONNECTIONS
Yellow
Brown
Green
White

13. ATTENTION

NOTE: Installation should always include all the accessories necessary to ensure operation in accordance with current laws and standards,
utilising always and only original parts.
Always follow the manufacturer's instructions for using and installing this equipment as he cannot be considered liable for any damages or
injury arising from an improper or unreasonable use.
The constructor declines all responsibility for any inaccuracies contained in this leafl et and reserves the right to make alterations at any time
without prior notice.
Control unit
- 15 -
EN