Operation - Delta 50-720 Manual De Instrucciones

HOW TO ATTACH THE DUST INTAKE HOSE TO THE MOTOR AND BLOWER ASSEMBLY
Disconnect machine from power source before connecting or disconnecting an air intake hose to
or from the blower and motor assembly.
The dust collector is supplied with a 4" flexible dust-intake hose.
1. Loosely attach the hose clamp (A) Fig. 15 around one end of flexible hose (B).
2. Attach the hose to the dust intake port. Tighten the hose clamp (C) Fig. 16.
3. Attach the remaining clamp to the other end of the flexible hose and to the woodworking machine.
IMPORTANT: Do not operate the dust collector if the flexible hose is not attached to the dust intake port.
A
B
Fig. 15
For your safety, cover the dust intake port with the hose before operating the machine. The rotating fan inside
the blower housing is accessible through the dust intake port and is hazardous. Cover the intake port with the intake cap when
you remove the hose. Always wear proper apparel. Do not wear jewelry. Keep your fingers and all foreign objects out of the
dust intake port. Always follow the safety rules in this manual.
HOW TO START AND STOP THE DUST COLLECTOR
Check to see that the switch is in the "OFF" position before plugging the cord into the outlet. Do
not touch the plug's metal prongs when unplugging or plugging in the cord.
The on/off switch (A) Fig. 17 is located on top of the motor. To turn the machine "ON", move the switch up to the "ON"
position (Fig. 17). To turn the machine "OFF", move the switch down to the "OFF" position (Fig. 18).
HOW TO LOCK THE SWITCH IN THE "OFF" POSITION
IMPORTANT: When the machine is not in use, the switch should be locked in the "OFF" position to prevent
unauthorized use, using a padlock at (A) Fig. 18 with a 1/4" diameter shackle.
In the event of a power outage (such as a breaker or fuse trip), always move the switch to the
"OFF" position until the main power is restored.
When using this dust collector, do not pick up anything that is burning, smoldering or smoking,
such as matches, cigarettes, or hot ashes.
Do not use to vacuum combustible explosive materials, such as coal, grain or other finely
divided combustible material.
Do not use to vacuum hazardous, toxic, or carcinogenic materials such as asbestos, pesticide
or lead-based paint debris.
C
Fig. 16

OPERATION

10
A
B
Fig.17
Fig.18