Remote Controls And Accessories - Cebora INVERTER TIG Manual De Instrucciones

5 REMOTE CONTROLS AND ACCESSORIES

The following remote controls may be connected to ad-
just the welding current for this welding machine:
Art. 193 Pedal control (used in TIG welding)
Art. 1260 BINZEL "ABITIG 200" Torch (200A-35%) m.4
Art. 1262 BINZEL "ABITIG 200"Torch Up/Down (200A
– 35%) – m. 4
Art. 1256 Water cooled torch BINZEL "ABITIG 450
W" (450A) – m. 4
Art. 1258 Water cooled BINZEL torch "ABITIG 450 W
Up/Down" (450A) – m. 4
Art. 1656 Power source carriage
Art. 1281.03 Accessory for electrode welding
Art. 1341 Cooling unit
Art. 1192 Art 187 (used in MMA welding)
Art. 1180 Connector to connect torch and pedal
control at the same time.
Art 193 may be used in any TIG welding
mode with this accessory.
Controls that include a potentiometer adjust the weld-
ing current from the minimum to the maximum current
setting by means of knob AA.
Controls with UP/DOWN logic control welding current
from the minimum to the maximum value.
17