Switch Trigger - RIDGID R48607 Manual Del Operador

FEATURES
TRIGGER
SPINDLE LOCK BUTTON
LOCKOUT
See Figure 5.
LEVER
A spindle lock button has been provided for locking the
spindle which keeps the blade from rotating. Remove the
battery pack. Depress and hold the lock button while install-
ing, changing, or removing blade only.

SWITCH TRIGGER

See Figure 5.
SWITCH
The saw will not start until you depress the trigger lockout lever
TRIGGER
and squeeze the switch trigger. To prevent unauthorized use
of the compound miter saw, remove the battery pack, and
lock the switch in the off position. To lock the switch, install
SPINDLE
a padlock (not included) through the hole in the switch trig-
LOCK
ger and make certain the switch is inoperable. If the switch
BUTTON
is still operable with the padlock installed, a padlock with a
larger shackle diameter must be used. Store the padlock key
in another location.
SWITCH
TRIGGER
PADLOCK
Fig. 5
10 - English