Assembly And Adjustments - DeWalt DC413 Manual De Instrucciones

FIG. 1
COMPONENTS (Fig. 2, 3)
A. Trigger switch
B. Lock-Off Button
C. Spindle lock button
D. Side handle
E. Abrasive wheel
F. Anti-lockup backing flange
FIG. 2
B
C
E
D
H
J
G. Threaded clamp nut
H. Guard (Type 1, Type 27)
I. Battery pack
J. Battery release button
I
J
A
DC415 SHOWN
FIG. 3
F
K

ASSEMBLY AND ADJUSTMENTS

Attaching Side Handle
The side handle (D) can be fitted to either
side of the gear case in the threaded holes.
Before using the tool, check that the handle
is tightened se cure ly.
To improve user comfort, the gear case will
rotate 90˚ for cutting operations.
Rotating the Gear Case
WARNING: To reduce the risk of
serious personal injury, turn tool off and
and remove battery pack before making
any adjustments or removing/installing
attachments or accessories.
1. Remove the four
screws attaching the
to motor housing.
2. Without separating the gear case from
motor housing, rotate the gear case
head to desired position.
9
F
G
D
corner
gear case