Mellerware Tasty! Modo De Empleo página 26

ESPAÑOL
Select the function you want the
–
appliance to perform.
Set the speed, temperature and
–
time to the desired values.
Work with the food you want
–
to process.
To avoid too sudden a start, it is
–
advisable to begin with the power
selector knob in its minimum
position, and then once the
appliance has started, increase
the power gradually up to the
desired level.
Once you have finished using
the appliance
Stop the appliance by pressing the
–
ON/OFF button.
Unplug the appliance from
–
the mains.
Clean the appliance
–
Cleaning
– Unplug the appliance from the mains
and let it cool before performing any
cleaning task.
– Clean the equipment using a damp
cloth with a few drops of washing-up
liquid and then dry.
– Do not use solvents, or products with
an acid or base pH such as bleach,
or abrasive products, for cleaning the
appliance.
– Do not immerse the appliance in water
or any other liquid or place it under a
running tap.
– Do not let water or any other liquid
get in through the air vents, as this will
damage components inside
the appliance.
– During the cleaning process, take
special care with the blades, as they
are very sharp.
– It is advisable to clean the appliance
regularly and remove any food remains.
– When cleaning the lid, it is best to
remove the silicone seal to clean
it separately.
– All the accessories are dishwasher safe.
– They can also be washed in soapy
water using a non-abrasive sponge
or brush.
– Clean the blades with a brush under
running tap water so that only the top
of the blades comes into contact with
the water.
– When cleaning the blades, it is best to
remove the blade seal to clean
it separately.
– Clean the jug taking care to dry the
connector pins thoroughly before using
the appliance again.
– The jug and the blades are dishwasher
safe on a gentle wash program.
– IMPORTANT: Never immerse the blades
or the jug in water for prolonged
periods, as water may seep inside and
damage their internal mechanism,
posing a risk of short circuit.
– Clean the jug using hot water to which
you can add a mild detergent.
– The inside of the jug and the blades
can be cleaned by filling the jug
EN ES