Before Use; Operation - cecotec Surface Precision 9500 Smart Healthy Manual De Instrucciones

polarity.
4. Close battery compartment again. Make sure it fits properly.

3. BEFORE USE

1. Take the device out of its package. Check carefully if there is any damage, and if there is,
immediately notify the Technical Support Service of Cecotec.
2. Remove the protective strip from the battery compartment, located on the bottom part
of the device, in order to activate it. This protective strip is placed for a more secure
transportation.
Further information
• Weight yourself without any clothing and barefoot.
• It is suggested to weigh yourself at the same time and always under the same
circumstances.
• Measured values might be distorted if weight is measured immediately after doing sport
or if you have not eaten or drunk enough over the day.
• Measurement of body fat, water content and muscle and bone mass is only possible with
bare and dry feet.
• The scale reacts to a minimum weight of 5 kg and rounds up weight to whole 100 g.
• Measuring surface must be clean in order to work properly.

4. OPERATION

CONVENTIONAL WEIGHING
1. Place the device on a solid, dry and flat surface (avoid carpets). Uneven floors will result
in inaccurate measurement results.
2. Tap your foot on the scale in order to activate the display.
3. Wait until display shows '0.0' (kg/lb/st).
Before standing on the scale, select unit of measure: kg, lb or st.
(SEE "MEASURING UNIT SETTING").
4. Stand on the scale, the device will star calculating weight.
5. Once the weight has been established, the number on the display will flash. You can now
get off the scale.
6. The device will turn off automatically after a few seconds.
BABYWEIGHT FUNCTION*
This function is designed to automatically obtain precise small weight results.
This function allows seeing, activating and checking the evolution of weight from the App (see
more 5 mobile APP).
SURFACE PRECISION 9500/9600 SMART HEALTHY
ENGLISH
19