Hamilton Beach Tango Serie Manual De Uso página 6

840080600env03 10/24/01 10:07 AM Page 6
Operation
Operating the Blender–Model 91350
wWARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
Controls
Two separate switches on the front panel
allow you to control the blender for precise
blending requirements:
• The Timer dial (Model 91350 only)
allows you to select the blend time. Turn
the dial clockwise to the desired setting.
• The On/Off switch will turn the blender
on for continuous operation or off.
Using the blender
Before you use the blender for the first
time, wash the container, cover, and cutter
assembly. Refer to "Cleaning Instructions."
Do not put the cutter assembly in the
dishwasher.
To operate the blender, proceed as follows:
1. Place the blender on a clean, dry, level
surface, set the On/Off switch to Off, and
turn the timer dial counterclockwise to the
off position.
2. Place cutter in the threaded collar, blades
up. Slip the gasket OVER the blades and
onto the base of the cutter assembly.
Screw the completed cutter assembly
onto the container.
6
wWARNING
Cut Hazard
Always place cover on container
before operating blender.
Do not put spoon or other utensils
in container when blending.
Failure to follow these instructions
can result in broken bones, cuts, or
other injuries.
Timer
Dial
Model 91350
3. Plug the blender into an electric outlet.
4. Place the ingredients to be blended into
the container.
5. Place the container onto the base.
Make sure it rests securely on the base.
6. Place the cover and filler cap on the
container.
7. Select the desired blend time.
8. Move the On/Off switch to the On position.
Release the switch; blending will stop
automatically after the desired time.
9. For manual operation, set the dial to
"manual". Blender will need to be turned
on/off manually.
Operation
On (I) /
Off (O)
Switch