Passing Sequences (With Ticket, In Normal Mode) - BFT Espas30 I Manual De Uso

5 - PASSING SEQUENCES (with ticket, in Normal mode)

Espas30 I detects with a loop the presence of a customer. The display and the light on the
ticket button light up and the instruction audio message is reproduced:
- the driver must press the button (point C) so that the ticket is issued from the slot
(point E).
A sensor installed on the ticket issue slot enables Espas30 I to activate the opening of the bar-
rier only once the ticket has been collected by the user.
This way, customers cannot enter the car park unless they have a ticket.
Espas30 I will keep the barrier open until the customer drives through and clears it: this is
achieved thanks to the safety loop installed at the barrier arm.
At this point, the barrier stays open until the customer has driven through and cleared the
barrier.
NOTE: If the ticket is taken and the loop is cleared, the barrier closes within 5 seconds if the
safety loop is not occupied.
26 - Espas30 I