Maintenance; Ordinary Maintenance; Special Maintenance; Disposal And Scrapping - Nitty-Gritty INOX MARK Manual De Uso

9. MAINTENANCE

Pay attention: before any maintenance it is necessary to disconnect the machine from the mains.
9.1. O
RDINARY MAINTENANCE
Before every work shift:

Check the condition of the machine's components and replace them if necessary; use only original parts.

Check the condition of the electrical equipment and value its reliability during operation.
At the end of work shift clean the machine:

Remove the marking felt (15) from the graphite insert (14) to prevent encrustations of the electrolyte on the tip due to
evaporation. Whenever marking felt (15) is worn or burnt, replace it with a new one before restart working. If the marking
felt (15) does not require replacement, rinse it out with water.

Once it has cooled down, clean the graphite insert (14) and tip of the torch to prevent encrustations.

Rinse the marking screen (17) with water to avoid the formation of any deposit.
Pay attention: N -G
ITTY RITTY
9.2. S
PECIAL MAINTENANCE
Extra-duty maintenance is generally effected by qualified technical of N
Pay attention: the N
ITTY
authorized people.

10. DISPOSAL AND SCRAPPING

Pay attention: the user must pursue the maximum environmental protection.
P :
ACKING this kind of waste is similar to the urban kind. It is therefore possible to dispose of it in the urban refuse disposal sites
without jeopardizing the environment or the population.
U :
the disposal of special waste must be in compliance with the regulations in force.
SED SPECIAL FELTS
D
ETERIORATED OR OBSOLETE MACHINERY
Special waste to be scrapped according to the machinery. With reference to the CE-2002/96 directive concerning
waste of electric al and electronic equipment (WEEE), during dismantling, the user must separate the electrical and
the electronic components and dispose them in the appropriate authorized collection centers or give them back as
they are to the seller, when a new purchase is made.
11. DECLARATION OF CONFORMITY: CE - R
N -G declares that the INOX MARK electro-chemical machine meets the following directives:
ITTY RITTY

Directive concerning Machines 2006/42/CE and succeeding amendments.

Directive concerning Low voltage 2006/95/CE.

Directive concerning Electromagnetic Compatibility 2004/108/CE.
and to the following harmonized regulations:
DIN EN ISO 12100-1, DIN EN ISO 12100-2, DIN EN 60204-1, EN 55011, DIN EN 61000-6-4, DIN EN 61000-6-2,
EN 61000-4-2, EN 61000-4-4.
 Directive 2002/95/EC (RoHS) - concerning using restriction of six specific dangerous substances (Cadmium, Mercury,
Lead, Hexavalent chromium, Polybrominated biphenyls - PBB, Polybrominated diphenyl ethers - PBDE) in electric
and electrolytic equipment sold in UE.
Spilamberto, 01/2015
is not liable for the consequences if other products are used.
-G guarantee will fall if the product is dismounted repaired or in any case handled by not
RITTY
:
-G or authorized centers.
ITTY RITTY
HS
O
Technical Director
24
Michele Lapelosa