Operation - cecotec PerfectCountry Manual De Instrucciones

ENGLISH
Note: the grill plate can only be used with this grill holder.
Warning: Do not unscrew these plastic feet under the grill plate. Removing the plastic feet
would reduce the gap between the grill plate and the base, which could cause the base to melt!
5. Use two m4x14 screws and stainless-steel fl at washers to
screw clockwise the grill handle and cover.
6. Connect the power cord to a power supply. Make sure the
device is stable and properly assembled before operating it.
7. If there is no need to use the barbecue feet, just assemble the
grill plate to the grill holder and connect the power cord.

5. OPERATION

1. Connect the appliance to the mains electricity supply.
2. Set the temperature regulator to the required temperature level. There are 5
temperature settings, from 1 (low) to 5 (high).
3. The product reaches a maximum temperature of 215 +/- 25 ºC with the cover in place
and of 195 +/- 25 ºC without it.
Note: It usually takes about 3 minutes to preheat. Preheating is faster with the roasting hood
in place.
4. The temperature indicator light will turn off as soon as the
required temperature has been reached.
5. Place the food to be grilled on the grill plate.
6. To turn the device off, turn the temperature regulator to the
minimum position and then disconnect it form the power
supply.
INDOOR OR OUTDOOR USE
The barbecue can also be used indoors as a griddle.
• If the device is going to be used inside the house, make sure to place at a minimum
distance of 30 cm from walls and other objects.
16 PERFECTCOUNTRY BBQ