Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
General
Cleaning
FEATURE OVERVIEW
•
To Remove and
Replace Surface
Elements and Drip
Bowls
•
To Raise the Top for
Cleaning
a
a
a
a a
a
a
a
a
a a
a
a
a
a
a
A rod swings up to support
the top for cleaning under-
neath.
Coil Surface Element
To Remove and Replace Surface Elements and Drip Bowls
ATTENTION: Never leave lids on the coil elements as they could be permanently damaged if the
coil is turned on by accident.
Prior to cleaning the coil elements make sure they are cold and that control knobs are
turned to OFF
Coil elements clean themselves when they are turned on.
Coil elements and drip bowls are removable and allow to clean the drip bowls.
To remove a coil element, push against the front edge and lift element up and out.
To clean by hand, wash the drip bowls in hot sudsy water. For hard to remove spots, use nylon
scrubber with soap. Rinse and dry will still warm.
Never immerse coil elements in water.
Be careful not to bend terminal ends when replacing elements after
cleaning.
To Raise the Top for Cleaning
1. Grasp the sides and lift from the front. A lift-up rod will support the top in its raised position.
Only lift the top high enough to allow the support rod to rest in place under the front of the
cooktop.
2. Clean underneath using a clean cloth and hot, soapy water.
3. To lower the top, lift the top slightly and lower the rod. Lower the range top down into the
range frame.
When lowering the lift-up range top, grasp the sides with fingertips only. Be careful
not to pinch fingers. DO NOT drop or bend the range top when raising or lowering. This could
damage the surface.
(Models: 790.45662/9)
(Models: 790.45662/9)
24
Publicidad
Capítulos
Tabla de contenido
