Parts Of The Device - VOX electronics DPS-6220 Manual De Usuario

 When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
 The iron is not to be used if it has been dropped, if there are any visible signs of
damage or if it is leaking.
 This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
 Children should be supervised to ensure that they do not play with the appliance.
 Keep the iron and its cord out of reach of children younger than 8 years of age
when it is energized or cooling down.
IMPORTANT
-While operating, the iron and the boiler reach very high temperatures, be very
careful, burns danger. Do not touch the metal parts of the iron when it is hot.
-Before replacing or cleaning, unplug the device from the power supply outlet and
wait until it completely cools down.
-Do not use the device outdoors.
-Do not use the device close to curtains, furniture or other inflammable objects.
-Caution: the steam is very hot, burns danger. Never direct the steam jet towards
persons, animals or objects that could be damaged or burned.
-Use only tap water or demineralized water to fill the tank. Other liquids could
damage components and gaskets causing the loss of the guarantee of the product.
-Do not put other liquids, other materials or additives in the tank.
-Always place the iron on a stable, flat and heat-resistant surface.
-Do not load weights on the monotube nor try to squash it.
-Do not wind the cable around the device.
-Check carefully that the label of the fabric to iron matches the setting and the
temperature of the iron.
-Always place the iron on its seat on the station, do not let the iron remain on fabrics
or elsewhere.
INSTALLATION
Take the device out of the box and remove the packing. In order to ensure sufficient
ventilation the distance between the iron and the wall or other objects should be at
least of 15cm on the back and of 15cm on the side.

PARTS OF THE DEVICE

1 Temperature Control Dial
2 Steam Trigger
3 Ready Light
4 Iron
5 Lock
6 Unlock
7 Tank handle
8 Water Tank
9 Station
10 Cord storage compartment
11 Power Switch
12 Lower Water Indicator Light
13 Clean Indicator Light
14 Steam cord
15 Power Cord