GB
2.2 Headlamp Installation (see page 6)
Mark the place of installation of the strobe headlamps.
Prior to drilling, ensure that vehicle parts lying underneath cannot be damaged.
We recommend sealing holes and recesses cut into metal with rust preventing agent.
1. Mark fastening points and drill holes.
Plug-type mounting: 2x Ø 11 mm or screw-type mounting: 1x Ø 11 mm (surface fitting standing or suspended)
For suspended fastening, turn the headlamp insert 180° (observe top marking).
2. Fasten the headlamp base.
3. Mount the headlamps and align them with the longitudinal vehicle axis.
28