Optional Accessories - Makita BO5040 Manual De Instrucciones

1. Applying wax
1
011086
Use an optional sponge pad. Apply wax to the
sponge pad or work surface. Run the tool at low
speed to smooth out wax.
NOTE:
First, wax a not conspicuous portion of the work
•
surface to make sure that the tool will not scratch
the surface or result in uneven waxing.
Always run the tool at low speed. Running it at high
•
speed may cause the wax to spatter.
2. Removing wax
1
011085
Use an optional felt pad. Run the tool at low speed
to remove wax.
3. Polishing
1
011084
Use an optional wool pad. Run the tool at low
speed and apply the wool pad gently to the work
surface.
1. Sponge pad
1. Felt pad
1. Wool bonnet
7
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Hook-and-loop
•
pre-punched holes)
Hook-and-loop type sponge pad
•
Paper dust bag holder
•
(For BO5041 only)
Hook-and-loop type felt pad
•
Hook-and-loop type wool pad
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
or attachments
Only use accessory or
type abrasive discs
are
(with