Reverberi M203 GL AUTOMATIC Instrucciones De Uso E Instalación página 21

Manuale del d'uso ed installazione – GL5Automatic
Problems
The iron fails to heat up
The iron is hot but fails to
deliver steam
Steam comes out from the
safety valve
The gauge (5) reads the
correct pressure and the
valve discharges
The gauge (5) reads a high
pressure
del 17-10-2008 - C:\SETTORE STIRO\M203\MANUALE ISTRUZIONI\M203.doc
Causes
1) Thermostat damaged
2) Switch damaged
3) Cable disconnected
1) The micro switch is
broken
2) The solenoid valve has
burnt out
3) The solenoid valve is
obstructed
1) Pressure switch
damaged
2) Safety valve broken
3) Safety cap unscrewed
P R O B E P O S I T I O N
Solutions
1) Replace
2) Replace
1) Replace the
switch
2) Replace the solenoid
valve
3) Disassemble and clean
the solenoid valve
1) Clean and restore the
valve or replace it
2) Check or replace the
pressure switch
relative connection pipe
3) Screw the cap or replace
the seal
micro
and
Pag. 21 di 56