Self-Diagnosis Function; Specifications - Sony GDM-C520 Manual De Instrucciones

Ocultar thumbs Ver también para GDM-C520:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

01US01COV-UC.book Page 8 Wednesday, July 3, 2002 10:07 AM
If thin lines appear on the screen
(damper wires)
These lines do not indicate a malfunction; they are a normal
effect of the Trinitron picture tube with this monitor. These are
shadows from the damper wires used to stabilize the aperture
grille. The aperture grille is the essential element that makes a
Trinitron picture tube unique by allowing more light to reach the
screen, resulting in a brighter, more detailed picture.

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the ! (power) indicator will either light up green or
flash orange. If the ! (power) indicator is lit in orange, the
computer is in power saving mode. Try pressing any key on the
keyboard or moving the mouse.
x If the ! (power) indicator is green
1
Disconnect any plugs from the video input 1 and 2
connectors, or turn off the connected computer(s).
2
Turn the monitor OFF and then ON.
3
Hold the control button upward for a few seconds
before the monitor enters power saving mode.
If all 4 color bars appear (white, red, green, blue), the monitor is
working properly. Reconnect the video input cables and check the
condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Inform your authorized Sony dealer of the monitor's condition.
x If the ! (power) indicator is flashing orange
Turn the monitor OFF and then ON.
If the ! (power) indicator lights up green, the monitor is working
properly.
If the ! (power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between orange
flashes of the ! (power) indicator and inform your authorized
Sony dealer of the monitor's condition. Be sure to note the model
name and serial number of your monitor. Also note the make and
model of your computer and graphics board.
Note
If you still have questions, please see Appendix for contacting Sony.
8

Specifications

CRT
Viewable image size
Resolution (H:Horizontal, V:Vertical)
Input signal levels
Damper
wires
Standard image area
Deflection frequency (H:Horizontal, V:Vertical)
AC input voltage/current
Power Consumption
Operating temperature
Dimensions
Mass
Plug and Play
Supplied accessories
Design and specifications are subject to change without notice.
0.24 mm aperture grille pitch, 90-degree deflection, FD Trinitron
21 inches measured diagonally
Approx. 403.8 × 302.2 mm (w/h) (16 × 12 inches)
19.8" viewing image
Maximum: H: 2048 dots, V: 1536 lines
Recommended: H: 1600 dots, V: 1200 lines
Video signal: Analog RGB: 0.700 Vp-p (positive), 75 Ω
SYNC signal: H/V separate or composite sync:
TTL 2 k Ω , Polarity free
Sync on Green: 0.3 Vp-p (negative)
Approx. 388 × 291 mm (4:3)
× 11
3
1
(15
/
/
inches) or
8
2
Approx. 364 × 291 mm (5:4)
× 11
3
1
(14
/
/
inches)
8
2
H: 30 to 130 kHz, V: 48 to 170 Hz
100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
≤ 135 W
10 ºC to 40 ºC
Approx. 497 × 499 × 487 mm (w/h/d)
× 19
× 19
5
3
1
(19
/
/
/
inches)
8
4
4
Approx. 30.5 kg (67.1 lbs)
DDC2B/DDC2Bi
Power cord
HD15 video signal cable
This instruction manual
GDM-C520

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido