Using The Monitor; Installing / Changing The Batteries; Connecting The Air Hose - AND UA-789XL Manual De Instrucciones

Installing / Changing The Batteries

1. Slide the battery cover up to open it.
2. Remove the used batteries and insert new
batteries into the battery compartment as
shown, taking care that the polarities (+)
and (-) are correct.
3. Slide the battery cover down to close it.
Use only R6P, LR6 or AA batteries.
CAUTION
Insert the batteries as shown in the battery compartment. If not, the device will
not work.
When (LOW BATTERY mark) blinks on the display, replace all batteries with
new ones. Do not mix old and new batteries. It may shorten the battery life, or
cause the device to malfunction.
(LOW BATTERY mark) does not appear when the batteries are drained.
Battery life varies with the ambient temperature and may be shorter at low
temperatures.
Use the specified batteries only. The batteries provided with the device are for
testing monitor performance and may have a limited life.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
Stored data are cleared when the batteries are removed.

Connecting The Air Hose

Insert the air connector plug into
the air socket firmly.

Using The Monitor

English 6
Step 2
Step 3
Step 1
Air connector plug
Air socket