Makita DC40RA Manual De Instrucciones página 6

You can mount the charger on the wall. Make a clearance around the charger as shown in the figure.
NOTE: Things you need to prepare:
— Two screws - hanging the charger
Screw size : 4.0 mm x more than 20 mm (5/32" x more than 13/16").
Screw head size : Less than ø9.0 mm and less than 3.5 mm thickness. (ø11/32" x 1/8").
— One screw (4.0 mm (5/32") x more than 25 mm (1")) - for anchoring the charger.
— Tools - for tightening screws
1. Fix two screws for hanging on the wall.
2. Hang the charger on the wall using the hook on the back.
250 mm
(9-7/8")
90 mm
(3-1/2")
20 mm
(13/16")
4 mm
(5/32")
5.0 mm
(3/16 " )
50 mm
(2")
ø9 mm
× 2
(ø11/32")
3.5 mm
(1/8")
6 ENGLISH
50 mm
(2")
180 mm
(7-7/8")