Nevir NVR-6044 MDS Manual De Instrucciones página 30

7. Pre-set Function
1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. Two stages can be set at most. Defrosting should not be set in
preset function.
Example: if you want to cook with 80% microwave power for 7 minutes.
a. Press "M ICROWAVE
" to choose 80% microwave power till "P80" displays;
b. Turn "
c. Press "START/+30SEC./CONFIRM" to confirm;
" to adjust the cooking time of 7 minutes;
d. Turn "
After the above steps, please do not press "START/+30SEC./CONFIRM". Then do as following:
3) Press "CLOCK/PRE-SET". The hour figures flash;
" to adjust the hour figures, the input time should be within 0--23.
4) Turn "
5) Press "CLOCK/PRE-SET", the minute figures will flash.
" to adjust the minute figures, the input time should be within 0--59.
6) Turn "
7) Press "START/+30SEC./CONFIRM" to finish setting. ":" will light, buzzer will ring twice when
the time arrives, then cooking will start automatically.
Note: clock must be set first. Otherwise,pre-set function will not work.
8. Auto Menu
1) In waiting state, turn "
2) Press "START/+30SEC./CONFIRM" to confirm the menu you choose;
" to choose the food weight;
3) Turn "
4) Press "START/+30SEC./CONFIRM" to start cooking;
5) After cooking finishes, the buzzer sounds five times.
" once;
" right to choose the menu from A-1 to A-8.
EN-14