Maintenance And Cleaning; Cleaning The Unit - Oase 45384 Instrucciones De Uso

Aliviadero cascada iluminada
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

- English -
Start-up
Attention! Dangerous electrical voltage.
!
Possible consequences: Death or serious injuries.
Protective measures:
• Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: Isolate the
units and installations (switch off and disconnect from the power supply) before reaching into the water.
• Isolate the unit before starting any work.
• Secure the unit to prevent unintentional switching on.
Inspect cord for damage before start-up and maintenance. Replace the entire light/transformer assembly if damage is found.
Important:
● The unit switches on automatically when power connection
is established.
1. Switching on: Connect the spillway to the transformer by
pushing the plug into the transformer socket until it is firmly
seated. Hand tighten the nut from the plug to the socket
2. Plug the transformer into a properly grounded electrical
outlet.
○ Connect the pump to a proper power source.
3. Switching off: Disconnect the transformer and pump from
power source.

Maintenance and cleaning

Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries.
Protective measures:
• Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: Isolate
the units and installations (switch off and disconnect from the power supply) before reaching into the water.
• Isolate the unit before starting any work.
• Secure the unit to prevent unintentional switching on.

Cleaning the unit

Clean the spillway regularly depending upon the environment in which it is operated. Clean
the spillway when it is visibly soiled or when a drop in performance is detected.
Before cleaning, always disconnect the transformer from the power source.
Use a dryer brush to clean the inside of the spillway. We recommend using a 10" long brush,
approximately 1" thick or any brush that will fit inside the front of the spillway opening.
Disposal
Do not dispose of this unit with domestic waste! Disable the unit beforehand by cutting off the cables. Further
information about the recycling of this product can be obtained from your local municipal authority.
1.
Transformer
Transformer
2.
Plug from
Lighted
Plug from
waterfall
Spillway
6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

45385

Tabla de contenido