Main Components; Preparation For Use - RAWLINK 56697 Manual De Instrucciones

4 4
5 5

Main components

1. Carrying handle
2. Cover plate
3. Socket for handle
4. Handle
5. Venting valve
6. Casters
7. Load wheel
8. Lifting arm
9. Jack saddle
10. Extender
11. Jack pad
1 1
3 3
2 2
6 6

Preparation for use

• Insert the handle (4) into the socket (3)
on the lifting mechanism and turn it into
place.
• The venting valve (5) is closed at the
factory so that the hydraulic oil does not
run out during transport.
• Open the venting valve by turning it no
more than 2 revolutions anticlockwise.
• Unscrew the oil plug.
• Pump the handle up and down rapidly
several times to distribute the hydraulic
oil in the hydraulic jack before using it for
the fi rst time.
• Screw the oil plug back in place.
bm
bl
9 9
8
GB
7 7
23