Identifying The Parts - Sony RM-1000BP Manual De Instrucciones

Identifying the Parts

 HOLD switch
HOLD is set or canceled by the position of this switch.
ON (right position): This unit is set to HOLD. This unit cannot operate the video camera.
OFF (left position): HOLD setting of this unit is cancelled.
You can select the control key that can be operated when this unit is set to HOLD. For
details, see "Separate HOLD Setting" (p. 16).
 START/STOP key
Recording starts by pressing this key.
To stop recording, press the START/STOP key again.
 POWER LED
The status of this unit is indicated.
Lit (green):
Blinking slowly (green): The video camera is in the auto-adjust recording status.
Blinking rapidly (green): The pressed control key is in HOLD status.
-GB
  
 
  
This unit is connected to the video camera correctly.
