Sony RM-1000BP Manual De Instrucciones página 37

Separate HOLD setting of the control key
1 Slide the ZOOM SPEED switch to FAST to set to the HOLD key select
mode.
 Set the desired control key to the key that can be operated when this
unit is set to HOLD by operating the key.
While you press and hold the key, the REC LED displays the status of the key.
Lit (red): The key cannot be operated when this unit is set to HOLD.
Lit (green): The key can be operated when this unit is set to HOLD.
 When you have finished making separate HOLD settings for the
desired keys, slide the ZOOM SPEED switch to MID to set to the
HOLD key check and store mode.
 Press the each key to check the status of the separate HOLD setting.
While you press and hold the key, the REC LED displays the status of the key.
Lit (red): The key cannot be operated when this unit is set to HOLD.
Lit (green): The key can be operated when this unit is set to HOLD.
 Press and hold the SEL/PUSH EXEC lever for two or more to store the
setting selected in the HOLD key select mode.
The separate HOLD setting is effective. The mode returns to the normal HOLD status.
If you do not operate the key for 15 seconds or more, the mode returns to the normal HOLD

status.
The separate HOLD setting is not effective until the setting is stored. If the mode is returns

to the normal HOLD status when you are setting the each key, the previous setting will be
disabled.
Initializing the separate HOLD settings of the control key
1 Slide the ZOOM SPEED switch to SLOW to set to the HOLD key
initialize mode.
 Press and hold the SEL/PUSH EXEC lever for two seconds or more.
The settings of the keys return to the default setting.
1-GB