Sharp FU-S25E Manual De Uso página 11

Mode Selection Button
Plasmacluster Ion Mode Selection Button
POWER ON/OFF Button
CLEAN - SIGN Light
* Ion Control Mode
Negative ions will be
released in an increased
rate and controls the ion
balance.
Plasmacluster Ion Mode Selection Button
The Plasmacluster Ion Mode can be switched.
AUTO
The unit will switch between Clean Mode and the Ion Con-
trol Mode* automatically depending on the amount of impu-
rities in the air as detected by the odour sensor. Clean Mode
operate for 10 minutes when the Auto function is selected.
CLEAN
The unit will constantly operate in the Clean Mode, in which
the same numbers of positive and negative ions are dis-
charged. The Plasmacluster Indicator Light is blue.
ION OFF
The generation of ions will stop and the Plasmacluster Indicator
Light will go out.
LIGHTS ON/OFF Button
(Please press the Plasmacluster Ion Mode Selection Button for 3
seconds.)
Switches the Plasmacluster Indicator Light and CLEAN-SIGN Light
either ON or OFF.
E-9