Franke AQRE431 Instrucciones De Montaje Y Uso página 8

Change battery
14.6 Remove the cover plate (see
14.7 Close the flow volume regulator (see
14.8 Disconnect the control unit from the battery box.
14.9 Remove the battery box from the flush mounting cabinet.
14.10 Loosen the screws.
14.11 Remove the old battery.
14.12 Insert a new 6 V lithium battery CR P2.
☞
Only use lithium batteries.
☞
Important!
Ensure correct battery polarity.
14.13 Reset the flush volume (see
14.14 Reassemble in the reverse order.
Replacing the O-ring for isolating valve
14.15 Interrupt the water supply.
14.16 Remove the cover plate (see
14.17 Remove safety ring (a) with the appropriate pliers for the inner safety rings.
14.18 Unscrew closing unit (b) with screwdriver.
14.19 Replace the O-ring (c).
14.20 Reassemble in the reverse order.
8
chapter 11.1).
chapter 9.3).
chapter 11.).
chapter 11.1).