Connections
Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.
1. Connections to DJ mixer (DJM-600, DJM-500, DJM-300, DJM-909, DJM-707
or DJM-3000) (audio output and control connector)
Using the accessory audio cable, connect the white plug to the L (left) connector, and connect the red plug to the R (right) connector.
By connecting the accessory control cord, the player can be controlled from the mixer, allowing fader start play and back cue operations.
Connection example DJM-600:
AUDIO OUT
L
R
Y
C
P
C
P
B
B
R
R
COMPOSITE
NORMAL
DJ
MODE
DIGITAL
AUDIO OUT
VIDEO OUT
OUT
SYNC IN
L
S
CONTROL
R
S
CONTROL
PREVIEW OUT
¶ Connect similarly to the above when using DJM-300 or DJM-500.
¶ When connecting DJM-909 or DJM-707, use the accessory audio cable to connect CH-1 CD to PLAYER A, and the CH-2 CD to
PLAYER B.
¶ In the case of the DJM-3000, connect A PLAYER to LINE 1 of CH-1, connect B PLAYER to LINE 3 of CH-2.
¶ When connecting this player to other audio mixers, the player's AUDIO OUT connector should be connected to the mixer's LINE IN
connector or AUX connector (# Do not connect the player to a mixer's PHONO connector, since sound will be distorted and
proper playback will not result).
2. Control cord connection for relay play
By using the accessory control cord to connect two DJ players, automatic relay play can be performed between the two units. ( P.40)
DVJ-X1
Y
C
P
C
P
B
B
R
R
COMPOSITE
NORMAL
DJ
MODE
DIGITAL
AUDIO OUT
VIDEO OUT
OUT
SYNC IN
L
S
CONTROL
R
S
CONTROL
PREVIEW OUT
DJM-600
B
DVJ-X1
Accessory control cord
Before Operating (Connections)
Accessory control cord
AUDIO OUT
L
R
CONTROL
Y
C
P
C
P
B
B
R
R
COMPOSITE
NORMAL
DJ
MODE
DIGITAL
AUDIO OUT
VIDEO OUT
OUT
SYNC IN
L
S
CONTROL
R
S
PREVIEW OUT
DVJ-X1
Y
C
P
C
P
B
B
R
R
COMPOSITE
NORMAL
DJ
MODE
DIGITAL
AUDIO OUT
VIDEO OUT
OUT
SYNC IN
L
S
CONTROL
R
S
CONTROL
PREVIEW OUT
Accessory
audio cable
A
DVJ-X1
13
<DRB1390> En