[Audio2] Settings - Pioneer DVJ-X1 Manual De Instrucciones

Preparations (Setup)
MPEG output
Set this option to [MPEG] if the connected amplifier supports
MPEG audio.
Audio1 A2 Video1 V2
Language
Audio DRC — Off
Dolby Digital Out — Dolby Digital
DTS Out Off
—
96kHz PCM Out — MPEG
MPEG 3 PCM
MPEG Out —
Change MPEG audio output mode
Move
MPEG:
Select this option if the connected amplifier or decoder supports
MPEG audio.
MPEG 3 PCM:
MPEG signals are converted to linear PCM for output. Select
this option if the connected amplifier does not support MPEG
(factory default setting).
Digital output ON/OFF (Expert Mode)
This setting allows disabling of outputs from the digital audio
output connectors.
Audio1 A2 Video1 V2 Language
Audio DRC — Off
Dolby Digital Out — Dolby Digital
DTS Out — Off
96kHz 3 48kHz
96kHz PCM Out —
MPEG 3 PCM
MPEG Out —
Digital Out — On
Off
Move
On:
Signals are output from the rear panel digital output connectors
(factory default setting).
Off:
Signals are not output from the rear panel digital output connec-
tors.
I Supports Dolby
*1
Digital / DTS
theater-like sound impact
1
By connecting an amplifier supporting Dolby Digital/DTS, you
can enjoy the immediacy and power of 5.1 channel movies
and music DVDs.
I Equipped with SRS TruSurround
(Virtual Surround)
Recreates the ambience of 5.1 channel sound using only 2
speakers. SRS TruSurround
processing of 5.1 channel digital sound data.
*1 Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
*2 "DTS" and "DTS Digital Out" are registered trademarks of Digital Theater Sys-
tems, Inc.
*3 TruSurround, SRS and symbol are trademarks of SRS Labs, Inc.
TruSurround technology is incorporated under license from SRS Labs, Inc.
22
En <DRB1390>
General
Exit
SETUP
General
Exit
SETUP
*2
for genuine
*3 technology performs direct

[Audio2] settings

¶ See P.20 for menu instructions.
Surround setting
# This option is not supported in DJ mode.
This function is supported only when connected to the audio
output connectors. Not supported during use of DTS audio, lin-
ear PCM 96 kHz audio.
Language General
A1 Audio2 Video1 V2
Virtual Surround
— Off
Legato TruSurround
Surround effect from 2 speakers
Move
Off:
Disabled (factory default setting)
TruSurround:
Select for virtual surround sound.
¶ If [TruSurround] is selected during playback of DVD Dolby
Digital 2ch discs, the audio level produced from the digital
output connectors will be reduced.
Also note that if the [Audio1] menu item [Dolby Digital Out]
is set to [Dolby Digital 3 PCM] when playing discs other
than those recorded in Dolby Digital 2ch format, selecting
[TruSurround] will cause audio output to be disabled from
the digital output connectors.
¶ Some discs may produce less surround effect than others.
Legato PRO function
Select from among the four ambience modes based on your
own preferences and the style of music being played. The char-
acteristics of the four modes are as follows:
Language General
A1 Audio2 Video1 V2
Virtual Surround
Off
Legato PRO Standard
Effect1
Effect2
Effect3
Wide Range Digital filter
You can select the quality of sound.
Move
Off:
Legato function disabled (factory default setting).
Standard:
Produces full-bodied sound presence.
Effect1:
Produces bright, vivid sound.
Effect2:
Produces sound with depth and reserve.
Effect3:
Produces sound with solid bass and balance.
¶ The Legato PRO function operates to change the audio digital
filter response of those bands primarily outside the audio
range.
¶ The amount of tonal change may vary, depending on the lis-
tening room environment.
SETUP Exit
Exit
SETUP