Melchioni 499048650 Manual Del Usuario página 6

REMOTE CONTROL FUNCTION
INSTRUCTION
BUTTON FUNCTION
The left one is OFF button,the right one is ON button, At any time just need to gently touch this
two buttons, than can make it open or closed.
The Above one is mode + Button, at any state just touch this key to change for the former mode.
The below one is mode - Button, at any state just touch this key to change for the latter mode.
Touch the ring as shown,can choose static color by touching the color wheel. Just touch ring, it will
output the corresponding color at any time.
In Static mode, brightness +, increase output luminance;in Dynamic mode, speed +, to speed up the
rate of change.
In static model, brightness-, Reduce output luminance; in Dynamic mode, speed -, slow down the
rate of change.
CHANGING MODELS ARE AS BELOW
NO. MODEL
1 Static red
2 Static green
3 Static blue
4 Static yellow
5 Static purple
6 Static cyan
7 Static white
8 Three color jump
9 Seven color jump
REMARKS
Brightness adjustable
Speed, brightness are
adjustable
NO. MODEL
10 Three Color fade
11 Three color flow
12 seven Color fade
13 Seven color flow
14 Three-colors flash frequency
15 Seven-colors flash frequency
16 Three-colors blasting flash
17 Seven color blasting flash
18 Automatic mode
REMARKS
Speed, brightness
are adjustable