Connection Instruction; Typical Applications - Melchioni 499048650 Manual Del Usuario

CONNECTION INSTRUCTION

DC+ :
For power input + (power supply voltage12v-24v)
DC-: For power input -
V+: For Load Common anode
R/CH1: Load output Red channel
G/CH2: Load output Green channel
B/CH3: Load output Blue channel
Power:
Red indicating light is for power light, when the
power on it will be turn on.
Receiver:
Green indicating light, normally it will be in the
state of OFF, it will be twinkle when received
signal from the remote. When the controller
output meets short circuit, the green indicating
light will be twinkle in a fixed frequency to
indicate the user.

TYPICAL APPLICATIONS

NOTES
1. The use of power and load voltage, current, power must be consistent with the product.
2. Please make the connection like the diagram above (to connect the load wire first, than to connect with the power),
In the process of operation please avoid short circuit.
3. This product warranty is 12 month, but not including the damage by people and other reason caused by over load
working.