Installation; Before The Installation - Zanussi ZGO63414 Manual De Instrucciones

Labels supplied with the accessories
bag
Stick the adhesive labels as indicated below:
A
MOD.
PROD.NO.
SER.NO
DATA
A. Stick it on Guarantee Card and send this
part (if applicable).
B. Stick it on Guarantee Card and keep this
part (if applicable).

Installation

WARNING!
Refer to Safety chapters.

Before the installation

Before you install the hob, write down the
information bellow from the rating plate. The
rating plate is on the bottom of the hob.
Model .......................................
PNC .........................................
Serial number ...........................
Gas Connection
WARNING!
The following instructions about
installation, connection and
maintenance must be carried out by
qualified personnel in compliance
with standards and local regulations
in force.
10
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
C
MOD.
PROD.NO.
SER.NO.
0049
C. Stick it on instruction booklet.
Choose fixed connections or use a flexible pipe
in stainless steel in compliance with the
regulation in force. If you use flexible metallic
pipes, be careful they do not come in touch with
mobile parts or they are not squeezed. Also be
careful when the hob is put together with an
oven.
Make sure that the gas supply
pressure of the appliance obeys the
recommended values. The
adjustable connection is fixed to the
comprehensive ramp by means of a
threaded nut G 1/2". Screw the
parts without force, adjust the
connection in the necessary
direction and tighten everything.
TYPE
IP20
www.zanussi.com