Cleaning And Care - STARFRIT 024220 Instrucciones De Uso

TO USE
1. Put the desired blade (2 or 4 blades) in the bowl. (P.2 Fig.3)
2. Put the desired ingredients in the bowl.
NOTE: Cut the fruits/vegetables into small pieces.
3. Place the food scraper in the bowl. (P.2 Fig.6)
4. Place the lid on the base and lock the lid by following the symbol on the base. Make sure
the lid is securely locked before operating. (P.2 Fig.8 and Fig.9)
CAUTION: The appliance has a locking mechanism that prevents the appliance from operating
or blade from turning if the lid is not securely attached to the base.
5. Plug the appliance into a standard 120-volt AC electrical outlet.
6. Select the desired speed control. Hold the speed control to PULSE for short bursts if
processing ice or frozen fruits/vegetables. For continuous blending, turn the variable
speed control to obtain the desired speed.
WARNING: Do not operate the appliance for more than two minutes continuously.
7. Use the food scraper when the appliance is chopping to make sure no food sticks to the
walls of the bowl.
8. Turn OFF "O" the appliance and unplug from electrical outlet when done chopping.
9. Remove the lid from the motorized base.
10. Pour the mixture in a bowl or use it as you want in your recipe.
11. Clean parts and accessories immediately after each use.

CLEANING AND CARE

WARNING: Ensure the appliance is unplugged from the electrical outlet and the blade has
stopped turning before handling or cleaning the appliance.
1. Disassemble all parts & accessories.
NOTE: Remove the silicone gasket only if necessary.
2. Wash in hot, soapy water or place in the dishwasher. Wash after each use.
NOTE: Do not place the motorized base or cord in a dishwasher
3. Dry all the parts & accessories thoroughly.
4. Wipe the motorized base with a soft, damp cloth and dry thoroughly.
5. Reassemble the chopper for compact storage. Ensure the silicone gasket is properly in place.
6. For safe storage, always store the blades with the bowl.
WARNING: Blades are sharp handle with care while cleaning. Use a brush to clean the blades
to avoid injuries. Do not touch blades with bare hands.
6