Weighstation CD564 Manual De Instrucciones página 2

Telephone Helpline: 0845 146 2887 (United Kingdom)
Setup
Position the appliance on a flat, stable surface.
1.
Adjust the feet of the appliance to make it level, use a spirit level if necessary.
2.
Note: It is important that the scales are level to ensure accuracy.
Operation
Features
To enter the features mode;
• Press the ON/OFF button such that the scales are switched OFF.
• Press and hold the HOLD button then press the ON/OFF button whilst keeping the HOLD button
depressed. Release both buttons, the display should show either "A_ON" or "A_OFF".
To allow the scales to switch off automatically;
• Press the ZERO/TARE button and the display will cycle between "A_ON" (automatic switch off is On)
and "A_OFF" (automatic switch off is Off).
To have the display backlight On;
• Press the HOLD button, the display should show either "L_ON" or "L_OFF".
• Press the ZERO/TARE button and the display will cycle between "L_ON" (backlight On) and "L_OFF"
(backlight Off).
Note: The HOLD button will cycle between the Auto Switch Off and Backlight functions.
Once complete, Press the ON/OFF button to save the settings.
Press to turn ON or OFF
Press to HOLD reading
Press to alternate between Metric (kg)
and Imperial (lb)
Press to Tare (set the scales to zero).
Stable reading indicator.
Low battery indicator.
ZERO indicator.
Hold indicator.
UK
1