Cleaning, Care & Maintenance; Technical Specifications - Weighstation CD564 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)
Cleaning, Care & Maintenance
• Remove the batteries (if fitted) and/or unplug the adaptor before cleaning or if the scales are to be left
unused for an extended period of time.
• Clean the weighing tray with warm, soapy water.
• Dry thoroughly after washing.
• Do not immerse the scales in water.
• Always unplug the adaptor when not in use to prevent over heating.
Calibration
Calibration requires an accurate 30kg weight.
• Press the ON/OFF button such that the scales are switched OFF.
• Press and Hold the ZERO/TARE button then press the ON/OFF button whilst keeping the ZERO/TARE
button depressed. Release both buttons, the display should show a four digit value.
• Wait for the Stable reading indicator to be displayed then press the UNIT button. "Save0" should be
displayed.
• Place a 30kg weight on the scales and wait for the Stable reading indicator to be displayed. Press the
UNIT button and "Save1" should be displayed.
• Calibration is complete, remove the weight and Press the ON/OFF button to save the settings.
• If the calibration does not appear accurate repeat the process ensuring that the scales are placed on a
level surface.

Technical Specifications

Model Power
9V Adaptor
CD564 or
6 x 1.5V AA Batteries
Compliance
The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible
for waste disposal in your area.
WEIGHSTATION parts have undergone strict product testing in order to comply with
regulatory standards and specifications set by international, independent, and federal
authorities.
WEIGHSTATION products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of WEIGHSTATION.Every
effort is made to ensure all details are correct at the time of going to press, however, WEIGHSTATION reserve the right to change
specifications without notice
Weigh Pan Minimum
Dimensions Weight
310 x 300mm 20g (1oz)
Maximum Measuring
Weight Increments
30kg (66lbs) 10g (0.5oz)
UK
2