Westfalia 46 216 940 Instrucciones De Montaje página 15

19. Repeat step 17 with the second fuse holder.
20. Fasten the fuse holder in a splash-proof manner (Photo 6).
21. Insert a 15A fuse.
Note
The constant plus line on pin 9 of the socket is integrated into the cable set.
Note: Ensure sufficient strain relief and correct installation of the fuse holder.
Special information concerning vehicles with parking distance control (PDC)
On vehicles with PDC it is possible to deactivate the PDC for trailer operation.
22. Lay the brown/white cable to the PDC control unit behind the left-hand storage rack (Fig. 1/3).
23. Open the 16-pin plug and insert the contact of the brown/white cable into compartment 5.
24. Close the plug and plug it back into the PDC control unit.
Note: If the vehicle is not equipped with a PDC system, insulate the brown/white cable and
secure it properly.
Checking correct operation
25. Reconnect the ground of the vehicle's battery.
26. Check the trailer function with the help of a suitable test instrument (with load resistors) or
with the help of a trailer.
27. Secure all cables using cable ties.
28. Reattach any parts removed for installation.
Lancia Musa WESTFALIA Automotive GmbH 306 353 391 101 - 002 - 11/09 15