Peg-Perego book Instrucciones De Uso página 17

_ Be careful not to hurt the child
when adjusting the mechanisms
(handlebar, backrest ... ).
_ Any weights hanging on the
handlebar or handles could make
the item unstable; follow the
manufacturer's instructions regards
the maximum loads transportable.
_ Any load applied to the handle and/
or the backrest and/or laterally to
the product can compromise the
stability of the product.
_ Do not load the baskets over
7 Kg. Do not put weight in the
cup holder (if present) in excess of
those indicated on the cup holders
themselves and never hot drinks. Do
not put loads of more than 0.2 Kg in
the hood pockets (if present).
_ Do not use the product near to
stairs or steps, heat sources, naked
flames or dangerous objects within
reach of the child.
_ Only replacement parts supplied or
recommended by the manufacturer/
distributor shall be used.
_ WARNING This product is not
suitable for running or skating.
_ WARNING Do not add any
mattress are not approved by the
manufacturer.
_ Do not use accessories which are
not approved by the manufacturer.
The images referring to the textile details may
differ from the collection purchased.
For more information, consult our website:
www.pegperego.com
INSTRUCTIONS
BOOK CHASSIS
1 OPENING: Before opening the frame, remove (without
using blades) any die-cut cardboard.
WARNING:
_ DO NOT PULL OR FORCE THE FASTENER BEYOND
ITS LIMIT.
_ DO NOT USE THE FASTENER AS A CARRY HANDLE
OR TO CARRY WEIGHTS.
DO NOT HANG BAGS OR OTHER ACCESSORIES TO
THIS FEATURE.
Press down the side fastener, hold the upper section
of the handle and rotate it towards you until the
frame is fully opened (fig_a). Open frame (fig_b).
The frame is properly opened when the attachment
on the base clicks into place, as shown.
WARNING: When placing the seat on the frame, press
the seat downwards to ensure it engages securely
onto the base.
2 FITTING THE WHEELS: Slot the uprights into the rear
wheel crosspiece (fig_a), ensuring that it is facing the
right way, then push the rear wheels on and make
sure that they click into place (fig_b). To mount the
front wheels, fit them into the uprights until they lock
into place (fig_c).
3 ATTACHING THE MAIN HANDLE: if the handle tube
faces upwards, align it with the stroller (Fig_a).
Fasten the handle to the frame as shown in the figure
(Fig_b).
To complete the operation, press the two side buttons
on the handle (Fig_c) to ensure the handle pushes in
all the way, until it clicks into place (Fig_d).
4 FITTING THE BASKET: if lowered, lift the basket tube
to the horizontal position. Press the silver buttons
under the metal basket tube located at the back of
the stroller (fig_a) and remove the metal tube (fig_b).
Thread the tube through the fabric loop on the back
of the basket, making sure that the two silver buttons
are facing downward (fig_c). Re-attach the tube to the
housings (fig_d).
5 Secure the two upper basket vinyl eyelets to the two
grey buttons on either side of the metal tube housing.
Please note that the eyelets open (fig_e). Remove the
cardboard from the lower rear bar.
WARNING: Secure the two lower basket vinyl eyelets
to the two grey buttons on the top of the lower rear
bar. Please note that the eyelets open (fig_f).
WARNING If this operation is not performed correctly,
the basket will not properly hold the weight.
Attach the basket tabs to the grey buttons on the
front of the frame (figure).
REFER TO OUR INSTALLATION INSTRUCTIONS VIDEO
AT: WWW.PEGPEREGO.COM
6 FIXED OR SWIVEL FRONT WHEELS Book: to fix the
front wheels, rotate the lever counter clockwise to the
locked padlock (fig_a); to release the wheels, turn the
lever clockwise to the unlocked padlock (fig_b). On
difficult terrain, we recommend using fixed wheels.
7 BRAKE: Press the lever down to apply the brake on the
chassis and lift it to release the brake.
8 ADJUSTABLE HANDLEBAR: To adjust the height of the
handlebar, press both of the side buttons at the same
time (fig_a) and swing it into the desired position
(fig_b), then release the buttons.
9 FOLDING UP: The chassis can be folded up without
the seat, with the seat facing the person pushing
(recline the backrest before folding it) or with the
seat facing forward. To fold the stroller, it is best to
set the front wheels to their fixed position and close
the hood (if fitted). Place the handle as shown in the
figure (fig_a).
Pull the inside handle on the base (fig_b) and lift it
(fig_c); th e handle will drop forward until the frame
is closed.
10 To ensure the frame is closed properly, check that
the side fastener is enabled (fig_a). When closed, the
frame remains in the upright position (fig_b).
11 For greater compactness, it is possible to remove the
wheels.
To remove the rear wheels: pull outwards on the lever
located under the rear bar and remove the wheels as
shown in figure (fig_a).
To remove the front wheels: press the tab as shown,
and remove the wheel (fig_b).
TRANSPORT: the stroller can be carried comfortably
locking the front wheels and grasping the main handle
(fig_c).
GANCIOMATIC SYSTEM
12
Ganciomatic is a fast and practical system that allows
you to attach the pram body, the car seat and the seat
to the Ganciomatic base of the chassis in one quick
step.
- 17 -