Electrical Connection; Important - Angelo Po 1G1FA0E Manual De Uso

Important

The connection must be made by author-
ised, skilled personnel, in accordance with
the relevant legal requirements, using ap-
propriate and specified materials.
The appliance is supplied with operating
voltage 400V/3N
(1G1FA0EV-2G1FA0EV), (230V/3 available
on request).
Connect the appliance to the
mains electricity supply as fol-
lows.
1 - If not already present, in-
stall a circuit-breaker (A)
with overload cutout and
differential
breaker close to the
appliance.
2 - Pull off the knob (B).
3 - Undo the screws (C) and
remove the control panel
(D).
4 - Undo the screws (E) to remove the lid (F).
5 - Connect the circuit-breaker (A) to the terminal
board (G) of the appliance as shown in the dia-
IT
gram and in the electrical system diagram at
the back of the manual.
GB
Use a flexible cable with at least type H07RN-F
characteristics, rated for an operating tempera-
DE
ture of at least 80°C.
Important
FR
When connecting, take care to connect the
neutral and earth lines.
ES
6 - Fit the lid (F) and secure it with the screws (E).
7 - Replace the control panel (D) and the knobs (B)
on completion of the operation.
English

ELECTRICAL CONNECTION

(1G1FA0E)
safety
Specify the correct voltage for your device;
it cannot be modified after purchase.
The appliance is supplied with operating
voltage 230V 1N ( only for 1G1FA0E ver-
sion).
Caution - warning
400V/3
Before doing any work, cut off the mains elec-
tricity supply.
B
A
E
G
- 20 -
C
D
IDM-396166012000.tif
E
F
IDM-39616601300.tif