Peg-Perego VIAGGIO 1-2-3 VIA Instrucciones De Uso página 29

sunlight, because some parts could overheat and cause
injuries to the delicate skin of your child. Verify that the
seat is not too hot before seating your child.
• Do not use the child car seat without the lining. This
lining cannot be replaced by other lining that has
not been specifically approved by the manufacturer
because it is an integral part of the seat and is essential
for safety purposes.
• Do not use the car seat without the protective shoulder
pads as they are an integral part of the car seat and the
safety system.
• Do not remove or replace the white polystyrene part
under the seat, in the backrest and in the headrest, as it
is essential for safety purposes.
• Do not remove the adhesive and sewn labels. The
removal of these labels could result in the product not
complying with the law.
• Do not use the child car seat if it is broken or if there
are missing parts, if it is second-hand or if it has been
subjected to heavy impacts as a result of accidents,
because it may be structurally damaged and be a
hazard.
• Do not alter the product.
• This article is progressively numbered through its
certification label, located on the bottom of the seat
(fig. 51).
• If in doubt, contact the manufacturer or retailer of this
child car seat.
• Contact the post-sales service for repairs, the
replacement of components and information on the
product. Contact information is provided on the last
page of this manual.
• The car seat must always be fixed in the car, even when
there is no child sitting in it. In the event of sudden
braking, it could injure the passengers.
• Do not use the child car seat if it is broken or if there
are missing parts, or if it has been subjected to heavy
impacts as a result of accidents, as it may have suffered
structural damage which is not visible but is extremely
hazardous.
• If using a second-hand product, make sure it is a recent
model, comes with instructions, and is fully functional
in all parts. An obsolete product may not conform to
safety standards, due to natural ageing of materials
and updating of regulations. If you have any doubts,
contact the manufacturer's customer service centre.
• Do not use accessories that have not been approved of
by the manufacturer or competent authorities.
Car seat, Group 1, "Universal" category,
with ISOFIX & Top Tether, class B1
Type approved under European standard ECE R44/04,
for children of weight from 9 to 18 kg (1 to 4 years
approx).
• Compatible with most car seats, though not all.
• The car seat can be correctly installed if the vehicle's
use and maintenance manual indicates compatibility
with "Universal", Group 1 ISOFIX class B1 restraint
systems with Top Tether. For further information on Top
Tether use, please see the following section.
• This child car seat is classified as "Universal" and meets
stricter homologation criteria compared to previous
models, which did not have the homologation label.
IMPORTANT
• Viaggio 1-2-3 Via must always be installed faced
forward only on seats with ISOFIX and Top Tether
connectors.
• Do not use without Top Tether. The Top Tether is
essential in order to guarantee complete safety.
• Do not install Viaggio 1-2-3 Via in seats that are
not in the direction of travel or are transversal with
respect to the direction of travel.
• It is always advisable to fit the child seat on the
rear seats and on the passenger's side.
• If the child seat is installed on the front seat, it is
advisable to place it as far as possible from the
dashboard.
• This item has a progressive serial number.
• If you experience problems during the installation
of Viaggio 1 2 3 Via, lift or remove the headrest.
29