Product Components - Peg-Perego Viaggio 2-3 FLEX Instrucciones De Uso

Ocultar thumbs Ver también para Viaggio 2-3 FLEX:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
not conform to safety standards, due
to natural ageing of materials and
updating of regulations. If you have
any doubts, contact the manufacturer's
customer service centre.
• Do not use accessories that have not
been approved by the manufacturer
or competent authorities.
1_
IMPORTANT
• "Viaggio 2-3 Flex": this car seat,
Group 2-3, must be installed in the
direction of travel.
• Do not install "Viaggio 2-3
Flex" on seats that are not in
the direction of travel or are
transversal to the direction of
travel.
• It is always advisable to fit the car
seat on the rear vehicle seat and
on the passenger's side.
• If the car seat is installed on
the front seat, it is advisable to
place it as far as possible from the
dashboard.
• If the vehicle's headrest makes
installing Viaggio 2-3 Flex difficult,
you can remove the vehicle's
headrest; if this is not removable
and interferes with the car seat's
headrest, please contact the After
Sales Service.

Product components

2. Inspect the content of the package
and contact the post sale Customer
Care if some items are missing.
_The car seat includes:
1 headrest (a), 1 backrest (b), 1 seat
(c), 1 Surefix Base integrated into the
seat (d).
The car seat is ready to use: no
assembly operation is required.
Opening the product
before use
3. Raise the car seat backrest until
it clicks; the product should remain
upright on its own. The backrest
oscillates by a few degree to better
adapt to various types of vehicle seat.
Product features
Viaggio 2-3 Flex adjusts to grow
with your child. Each adjustment is
independent, to ensure maximum
flexibility of use.
4• The headrest can be adjusted in
3 positions. Lift the handle (fig_a)
on the back of the headrest and
simultaneously raise the headrest
(fig_b), placing it at the desired height.
IMPORTANT: as the child
grows, it is necessary to adjust the
height of the headrest according
to that of the child.
IMPORTANT: after completing
the operation, try moving the
headrest to ensure it is correctly
fitted in place.
5• The width of the backrest may be
adjusted in three positions (closed,
mid, opened). Push the button on
the side of the knob (1) and rotate
the knob (2) clockwise to open the
wings. This operation is required as
your child grows. To close the wings,
17

Publicidad

Tabla de contenido
loading

Tabla de contenido