Service Information - Simpson MS60753 Manual De Instrucciones

5. Squeeze bottle to inject contents into pump.
6. With ignition switch off, simultaneously pull starter rope and squeeze bottle.
Repeat until protector fluid exits pump outlet. NOTE: This step may require
two people.
pRESSURE WASHER
1. Drain all water from high pressure hose and wrap it onto hose wrap.
2. Drain all water from the spray gun and wand by holding spray gun in a vertical
position with nozzle end pointing down and squeezing trigger. Store in gun
holder.
3. Wrap up and secure detergent siphon hose so it is protected from damage.
ACCESSORIES
DANGER: Risk of fluid injection. When using replacement spray wands or
guns with this pressure washer, DO NOT use a spray wand and/or spray gun/
wand combination that is shorter in length than what was provided with this
pressure washer as measured from the nozzle end of the wand to the gun
trigger.
NOTICE: The use of any other accessory not recommended for use with this tool
could be hazardous. Use only accessories rated equal to or greater than the rating
of the pressure washer.
SpECIFICATIONS
Model
PSI Max*
GPM Max*
High Pressure Hose
Presure of Inlet Water
Inlet Water
Soap Consumption Rate
* R ated Pressure and Rated Water Flow is within manufacturing tolerance of
(+/- 10%).
In a continued commitment to improve quality, the manufacturer reserves the right
to make component changes, design changes, or specification changes when
necessary and without notice.

SERvICE INFORMATION

Do not return this product to your retailer. Please contact our customer service
department at www.simpsoncleaning.com
LIMITED WARRANTY
90 DAY LIMITED WARRANTY ON pRODUCT COMpONENTS EXCLUDING pUMp
SIMPSON
® warrants to the original purchaser that the wheels, gun, hose, wand, spray
nozzle(s) and other components of the
warranty are free from defects in material and workmanship for 90 days from the date
of purchase.
MS60753
2800 PSI
2.3 gpm
25 ft. (7.6 m)
20–100 PSI
cold tap (100 °F max)
10% max
SIMPSON ® pressure washer covered under this
18- ENG
ONE YEAR LIMITED WARRANTY ON pUMp AND FRAME
SIMPSON
® warrants to the original purchaser that the pump of the
pressure washer covered under this warranty is free from manufacturer's defects in
material and workmanship for one year from the date of purchase. The one year limited
warranty applies to the pump only.
SIMPSON
® will repair or replace, at
which have failed within the above warranty periods. Service will be scheduled
according to the normal work flow and business hours at the service center location,
and the availability of replacement parts. All decisions of
limited warranty shall be final.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
ENGINE WARRANTY
The engine warranty is covered under the terms and conditions as outlined by the
engine manufacture's warranty contained herein and is sole responsibility of the engine
manufacturer.
RESpONSIBILITY OF ORIGINAL pURCHASER (INITIAL USER):
• To process a warranty claim on your
concern to www.simpsoncleaning.com for authorization and direction to the
nearest authorized service centre in your area.
• Retain original cash register sales receipt as proof of purchase for warranty work.
• Use reasonable care in the operation and maintenance of the product as described
in the Owners Manual(s).
THIS WARRANTY DOES NOT COvER:
• Merchandise sold as reconditioned, used as rental equipment, or floor or display
models.
• Merchandise that has become damaged or inoperative because of ordinary wear,
misuse, cold, heat, rain, excessive humidity, water quality, freeze damage, use
of improper chemicals, negligence, accident, failure to operate the product in
accordance with the instructions provided in the Owners Manual(s) supplied with
the product, improper maintenance, the use of accessories or attachments not
SIMPSON
recommended by ® , or unauthorized repair or alterations.
• Repair and transportation costs of merchandise determined not to be defective.
• Damage due to chemical deterioration, scale build up, rust, corrosion or thermal
expansion
• Costs associated with assembly, required oil, adjustments or other installation and
start-up costs.
• Expendable parts or accessories supplied with the product which are expected to
become inoperative or unusable after a reasonable period of use, including but not
limited to springs, nozzles, o-rings, washers, and similar accessories.
SIMPSON
• Merchandise sold by ®
as the product of another company, such as gasoline engines. The product
manufacturer's warranty, if any, will apply.
ANy INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE,
•
OR ExPENSE ThAT MAy RESULT fROM ANy DEfECT, fAILURE OR
MALfUNCTION Of ThE PRODUCT IS NOT COVERED By ThIS WARRANTy.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
SIMPSON
SIMPSON
® 's option, products or components
SIMPSON
® with regard to this
SIMPSON ® pressure washer, report the
which has been manufactured by and identified
19 - ENG
®