Switching Microphone Sensitivity; Reducing Noise (Low Cut Filter) - Panasonic RR-XS410 Instrucciones De Funcionamiento

Switching microphone sensitivity

Switch the microphone sensitivity according to
the volume of the sound source. When the sound
source volume is loud, set the sensitivity to "LOW".
When it is low, set the sensitivity to "HIGH".
• Press [g STOP/RETURN] to stop the unit.
1
Press [MENU] .
2
Press +, – to select "MIC REC MENU"
and press [q OK] to enter.
3
Press +, – to select "MIC SENS."
and press [q OK] to enter.
4
Press +, – to select "HIGH" or "LOW" and
press [q OK] to enter.
(The factory setting is "HIGH".)
To exit the setting screen, press [F2 (CLOSE)].
When the microphone sensitivity is
High or Low, " " or "
respectively.
" is displayed

Reducing noise (LOW CUT FILTER)

Sound of low frequency range is reduced during
microphone recording. This is effective when
reducing noise of air conditioning equipment, etc.
while recording at a meeting, etc.
• Press [g STOP/RETURN] to stop the unit.
1
Press [MENU] .
2
Press +, – to select "MIC REC MENU"
and press [q OK] to enter.
3
Press +, – to select "LOW CUT FILTER"
and press [q OK] to enter.
4
Press +, – to select "ON" and press [q OK]
to enter.
(The factory setting is "OFF".)
To exit the setting screen, press [F2 (CLOSE)].
" " is displayed.
ENGLISH
21
21