Operation; Maintenance; Customer Responsibilities; Storage - Agri-Fab 45-0326 Manual Del Usuario

For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983

OPERATION

HOW TO USE YOUR SWEEPER
BRUSH HEIGHT ADJUSTMENT
To adjust your sweeper brushes to the best operat-
ing height, loosen the adjustment knob and push
down on the height adjustment lever to raise the
brush. Best adjustment is when the brush setting is
1/2" down into the grass. Always mow the grass to an
even height before sweeping.
SWEEPING SPEED
Try a starting speed of approximately 3 m.p.h. (third
gear on most tractors). Depending on the conditions,
it may be necessary to adjust the sweeping speed in
order to achieve best results.
DUMPING OF SWEEPER
Your sweeper can be dumped easily without getting
off of the rider or tractor. Simply pull the rope forward
to dump the hopper. Always empty hopper after each
use.
CAUTION: Never attach the hopper rope to any
part of your body or clothing! Never hold onto
the rope while towing the sweeper! Attach the
rope to the towing vehicle to keep it away from
wheels and rotating parts.
CAUTION: Keep sweeper away from fire. Ex-
cessive heat can damage the brushes and
hopper bag and could cause the bag and its
contents to burn.

MAINTENANCE

CUSTOMER RESPONSIBILITIES

1. Check for loose fasteners before each use.
2. Clean the sweeper after each use.
a. Clean sweeper housing with a soft brush or cloth.
b. Clean debris from hopper bag with a brush or
broom.
c. Remove any material which has wrapped around
brushes or ends of brush shaft.
3. Inspect for worn or damaged parts, such as brushes
and wheels before each use. Replace as necessary.
ENGLISH
4. (Figure 22) Lubricate the brush shaft bearing twice a
5. Lubricate the wheel bearings each season. Remove
6. (Figure 23) Every two years, remove the wheels and

STORAGE

1. Clean the sweeper and hopper bag thoroughly to help
2. To collapse the hopper bag for storage, remove the two
3. Store in a dry area.
11
www.mymowerparts.com
year with a few drops of light weight oil.
HEIGHT ADJUSTMENT SLOT
OIL BEARINGS HERE
FLAT WASHER
the hub cap and apply a few drops of light weight oil.
clean the gears found inside the wheel housing. After
cleaning, lubricate the gears with an even coat of
light grease. To remove the wheel, pop off the hub
cap and remove the lock nut and flat washer.
HEX BOLT FLAT WASHER
SPACER
CAUTION: Before storing the sweeper,
always empty the hopper bag to avoid
spontaneous combustion.
prevent rust and mildew.
hopper support rods from the rear of the hopper.
22
HEX BOLT
23
FLAT WASHER
HUB CAP
HEX LOCK NUT