9902L Vision System Specifications - Cognex In-Sight 9000 Serie Manual De Instrucciones

9902L Vision System Specifications

Specifications
24VDC ±10%, 1.5A maximum
Power
Consumption
Case 0°C to 50°C (32°F to 122°F).
1
Temperature
Storage -20°C to 80°C (-4°F to 176°F)
Temperature
Humidity < 80% non-condensing
Protection IP67 with all cables properly attached (or the provided connector plug installed), the IP67-rated
cover properly installed, and the Micro SD card cover fastened in place.
Shock (Shipping IEC 60068-2-27: 18 shocks (3 shocks in each polarity in each (X, Y, Z) axis) 80 Gs (800m/s
and Storage) 11ms, half-sinusoidal) with cables or cable plugs and a 150 gram or lighter lens attached.
Vibration IEC 60068-2-6: vibration test in each of the three main axis for 2 hours @ 10 Gs (10 to 500 Hz
(Shipping and at 100m/s
2
Storage)
1
To verify case temperature, use the EV GetSystemConfig("Internal.Temperature") Extended Native Mode
command. When issued, it returns the vision system internal temperature in degrees Celsius, which is
approximately 3 to 5 degrees above the vision system case temperature. For more information, see the In-Sight
Explorer Help file. A thermal scanner can also be used to determine the vision system case temperature. Additional
cooling measures are required if the case temperature cannot be kept below 50°C. Examples of such measures
include: extra heat sinking and/or air movement.
2
Before you ship this product or any machinery that contains it, remove lenses that weigh more than 150 grams.
2
/ 15mm) with cables or cable plugs and a 150 gram or lighter lens attached.
14
9902L
2
at
®