Device Identification / Identity Code - ProMinent DULCOMETER D1C Instrucciones De Servicio

2

Device Identification / Identity Code

D1C DULCOMETER ® Controller Series D1C
W Wall mounting
D Control panel installation, 96 x 96 mm
Operating voltage
0 230 V 50/60 Hz
1 115 V 50/60 Hz
2 200 V 50/60 Hz (control panel installation only)
3 100 V 50/60 Hz (control panel installation only)
4 24 V AC/DC
B
C
L
P
R
H
S
A
D
Z
X
T
D1C A
22
Measured variable
Bromine (0.1...13 mg/l)
Chlorine (0...0.5/2/10/20 mg/l)
Conductivity (0...20/200/2000 µS/cm; 0...20/200 mS/cm)
pH (0...14 pH)
Redox (-1000...1000 mV)
Hydrogen peroxide (1...20; 10...200; 100...2000 mg/l)
Standard signal (0/4-20 mA)
Peracetic acid (10...200; 100...2000 mg/l)
Chlorine dioxide (0...0.5/2/10/20 mg/l)
Ozone (0...2 mg/l)
Dissolved Oxygen (0.1...10/20 ppm)
Temperature (0...100 °C)
Connection of measured variable
1 Terminal, standard signal 0/4-20 mA (signal converters necessary for controllers
with measured variable connection, standard signal 0/4-20 mA
2 SN6 connector for P or R
3 Terminal for L
4 Terminal PT 100 for T
5 Terminal mV for P or R
7 Terminal standard signal 0/4-20mA for sensors PAA 1 and PER 1
Correction variable
0 None
1 pH for chlorine
2 Temperature for P, D, H, A or L via terminal
3 Temperature for P, D, H, A or L via standard signal 0/4-20 mA
4 manual temperature entry for P, H, A or L
Feedforward control
0 None
1 Flow as standard signal 0/4-20 mA
2 Flow as frequency 0 - 500 Hz
3 Flow as frequency 0 - 10 Hz
0
1
Please enter the identity code of your device here.
Control input
None
Pause
Signal output
0 None
1 Standard signal 0/4-20 mA measured value
2 Standard signal 0/4-20 mA controlled variable
3 Standard signal 0/4-20 mA correction variable
4 2 standard signal outputs 0/4-20 mA, freely programmable (not for H, A)
Power control
G Alarm and 2 limit value relays
M Alarm and 2 solenoid valve relays (pulse length control)
R Alarm relay and actuator with feedback
Pump control
0 None
2 Two pumps
0
1
2
Control characteristic
None
Proportional control
PID control
Log output
0 None
Language
D German
E English
F French
I Italian
N Dutch
S Spanish
P Polish
A Swedish
B Portuguese
U Hungarian
G Czech