i.t.works SUNB1 Manual De Instrucciones página 7

2. Press SET / ALM SET once again, the month digit will flash to the right hand side of the
display next to the weather forecast icon. Press
3. Press SET / ALM SET once again, the date digits to the right hand side of the display nex
to the weather forecast icon will flash. Press
4. Press SET / ALM SET again, the time digits change to "24Hr"and flash. Press
select 12/24 hr time format: When the 12Hr time format is selected, the AM / PM indicator
will be displayed.
5. Then press SET once again, the time digits change to "00"and flash. Press
to select time zone:-
6. Press SET /
7. Press SET /
minutes.
8. Press SET / ALM SET to return to normal mode, or it will return to normal mode in aroun
15 seconds if no further buttons are pressed.
Remark: When your weather station is receiving radio controlled time signal, all buttons except the
snooz e / light button will not function.
If only flashes on the display then press and hold for two seconds the wave
cancel the automatic DCF signal.
TO SET ALARM TIME
Pr ess SET / ALM SET once, time dig
hold SET / ALM SET for 2 sec
alarm time.
Press SET / ALM SET again, alarm minute digits flash. Press
Press SET / ALM SET again, time digits change to "05" and flash. Press
dur ation from 1 to 20 minutes.
Press SET / ALM SET to return to normal mode, or it will return to norma
if no further press of any other b
TO TURN ON OR OFF YOUR ALARM
Si mply press SET/ALM SET to display the
turn on/off the daily alarm. When the alarm
hour and minute digits. If you see – displayed on the outside temperature indicator then you hav not
first pressed SET/ALM SET button re-select channel 1 by pressing the
TO USE SNOOZE ALARM
W hen time reaches your set alarm time, your weather station will give a eep sound to w
The icon will flash.
1) Press the SNOOZE / LIGHT button once to stop the alarm temporarily, the
flashing. The alarm will
2) To stop the alarm, press
icon become static, alarm will beep again at the same time the next day.
Alarm Duration: 2 minutes
"00" = GMT +1 hour (e.g. Germany)
"01" = GMT +2 hours (e.g. Finland)
"-01" = GMT 00 hour (e.g. U.K.)
ALM SET again, the hour digits will f
ALM SET again, the minute digits w
its change to alarm time di
onds, the hour digits flash. Press
uttons.
alarm time. When the al
function is turned on, the
bee p again at your set duration.
/ CHANNEL (ALM On-Off) once, the alarm beep will stop and
/ button to set month.
/ button to set date.
lash. Press
ill flash. Press
gits " AM
/
/ to set alarm minutes.
arm ti
EN.6
/
/ to set the hours.
/ button to set the
o o
( C / F ) button to
7:00 AL". Then press and
to set your desired hours of
/ to set the sn
l m de o in around 8 secon
me is displayed press
i con appears between the
button again.
b ake you up.
icon keeps
t
/ to
button
d
ooze
ds
to
e