Before Use - Metabo HPT UC 18YTSL Manual De Instrucciones

(4) When charging is completed (Fig. 7)
○ The USB power indicator lamp will not go out when a USB device has been completely
charged.
To verify charge status, check the USB device.
○ Turn the USB power switch OFF and unplug the power cord from the electrical outlet.
(Fig. 7)
○ Remove the battery from the charger and place the rubber cover over the USB port.

BEFORE USE

Check the work area to make sure that it is clear of debris and clutter.
Clear the area of unnecessary personnel. Ensure that lighting and ventilation is adequate.
USING AS AN AC POWER SUPPLY
WARNING
○ Grounded plugs cannot be used with the charger.
○ Note that devices that require grounding pose the risk of electric shock.
○ Check the individual device before use.
The product includes convenient AC outlets for use as a power supply for AC devices. (Two
locations: Total current capacity is 10 A.)
AC devices can be used by plugging them into the AC outlets on the charger with the charger
power supply plug plugged into an electrical outlet.
AC outlets (two locations)
USB cable
USB cable
Rubber cover
Plug of
the AC device
USB port
Fig. 7
AC device
AC device
Plug of the charger
Fig. 8
English
Electrical outlet
15