Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
NOTE:
○ AC devices connected to the charger should not exceed a total of 10 A.
Doing so may cause the charger to malfunction.
Read the instruction manual carefully for the device to be used, and check the current
rating before use.
○ Make sure the charger power supply plug is plugged into an electrical outlet while using an
AC device.
(1) Select usage confi guration
○ Using an AC device with power supplied from an electrical outlet. (Fig. 9-a)
○ Using an AC device and charging a battery with power supplied from an electrical outlet.
(Fig. 9-b)
MAINTENANCE AND INSPECTION
CAUTION: Pull out battery before doing any inspection or maintenance.
1. Check the Screws
Loose screws are dangerous. Regularly inspect them and make sure they are tight.
CAUTION: Using this multi port charger with loosened screws is extremely
dangerous.
2. Check for Dust
Dust may be removed with a soft cloth or a cloth dampened with soapy water.
Do not use bleach, chlorine, gasoline or thinner, for they may damage the plastics.
CAUTION: In the operation and maintenance of power tools, the safety regulations
and standards prescribed in each country must be observed.
16
AC device
a
Fig. 9
AC device
b
Publicidad
Tabla de contenido
