Beginning Work With The Machine - Taski swingo 350E Manual Del Usuario

Notice:
For a precise dosage, use the scale in the
dosage cup.
The filling level mark on the tank corre-
sponds to the mark in the dosage cup. The
type of machine is noted in the dosage
cup!
Dosing examples:
Information on the packing of
the product
0.25% 25 ml for 10l
of water
0.5% 50ml for 10l
of water
• Fill the dosing cup with a suitable product and pour the con-
tent into the fresh water tank. Repeat the procedure until
the required dosing is reached.
• When dosing is finished, the dosing cup will remain in the
tank.
Dosing variants
• The TASKI J-Flex or the QFM dosing station can also be
used for simple and fast dosing.
For further details, please contact your TASKI service part-
ner.
Pre-cleaning
Attention:
Remove any objects (wooden, metal parts
etc.) from the cleaning surface.
The objects could be catapulted by the ro
tating tool, and thereby cause injuries to
people and damage to the environment.
Tank capaci- Product vol-
ty ume per tank
filling
10l 0.25l
10l 0.5l

Beginning work with the machine

Attention:
Always wear slip-resistant shoes and ap-
propriate working clothes when working
with this machine!
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
• Bring the machine into operating po-
sition by swinging up the parking
support.
When lifting the machine, the parking
support is folded up by a spring.
• Operate the adjusting lever at the
machine handle and lower the guide
bar slowly until your arms are
stretched out (working position).
• Release the adjusting lever to lock the guide bar.
Manual program start
• Switch on the machine (main switch).
Switch lights up
• Switch off the suction unit.
Switch lights up
-
• Press the switch cleaning solution.
Switch lights up
• Use the quantity control to dose the
cleaning solution.
• Press the operating lever.
The tool is activated.
EN
63