Cleaning And Maintenance - HQ-Power VDPLC006 Manual Del Usuario

• Only use the device for its intended purpose. All other uses may lead to
short circuits, burns, electroshocks, crash, etc. Using the device in an
unauthorised way will void the warranty.
• Do not shake the device. Avoid brute force when installing or operating
the device.
• The operating temperature must not exceed 45° C.
4. Features
• easy DMX controller
• master dimmer fader
• for DMX, LED PARs and conventional lighting
• on/off switch
• 3 pin XLR DMX output
• operates with 9VDC battery or included power supply
5. Overview
Refer to the illustrations on page 2 of this manual.
6. Operation
1. Connect your lighting device to the controller with the appropriate DMX
cable.
2. Turn both devices on.
You can now start using the controller:
Slider 1 to 6
Use the sliders 1 to 6 on the controller to change the effects of the
corresponding channels on the lighting device.
Master slider
The master slider provides an overall control of the DMX output set by
sliders 1 to 6.
7.

Cleaning and maintenance

• The housing should not be deformed, modified or tampered with.
• The electric power supply cables must not show any damage. Have a
qualified technician maintain the device.
• Disconnect the device from the mains before starting maintenance
operation.
• Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.
• There are no user-serviceable parts.
• Contact your dealer for spare parts if necessary.
V. 00 – 10/05/2012
VDPLC006
4 ©Velleman nv