Bushnell Neo+ Manual De Usuario página 18

Options Menu
4. Next, select MAP GPS POINTS and press
5. You can select a name for it from a list of
BATTERY LEVEL: Displays the remaining battery power
level as a percentage.
SATELLITES: Displays the available GPS satellite relative
positions and signal strength, along with an indication
of the overall satellite reception quality ("STRONG",
"GOOD", "WEAK").
18
Options
OK/SHOT (Fig. 15). Select the hole (Fig. 16),
then the default name for the point (Fig. 17)
and press OK/SHOT.
common ABBREVIATIONS (Fig. 18, 19) or
give it your own USER DEFINED name. After
you have selected or created a name for the
custom point, make sure you are standing
at the point, and press OK/SHOT to register
it. You can also just accept the default name
and go directly to REGISTER POINT.
Fig. 18
Fig. 15
Fig. 16
Fig. 17
Fig. 19